150 sakg 28 ii 0170320000 28/70/53 (1.1/2.76/2.09) 600 v / 115 a / #2 awg 600 v / 135 a / #8? awg 1000 vac / 110 a / 35 mm 2 22.6 (200.0) 6 t ype part no. ep 1 (2) 0205100000 ep 1 (2) 0205200000 tw 1 (2) 0151400000 tw 1 (2) 0164600000 ql 2 0193900000 ql 3 0407600000 ql 4 0407700000 ah 28 0326660000 dek 5/5 0473460001 dek 5/5 0473560001 cable lug 32/35 mm din-rail terminals feed through note: part numbers shown are for a single card of pre-printed tags numbered 1-50. for additional information, see accessories section. note: final number in model indicates no. of poles (e.g. ql 2 = 2 poles). for additional information, see accessories section. see accessories section for mounting rails, end brackets, test taps, additional marking material and accessories. a vailable options version krg dimensions w idth / length / height mm (in.) with ts 35 x 7.5 with ts 32 insulation stripping length mm (in.) t echnical data rated voltage / rated current / wire size ul csa vde to r que nm (lb. in.) clamping screw m end plate, hard paper (thickness mm) for tr opic-proof for tr opic-proof partition, hard paper (thickness mm) tr opic-proof jumpers ql cover marking tags print consecutive horizontal consecutive vertical the weidmuller sakg range offers the following connection variations: clamping yoke connection, version iii. the stripped conductor can be connected without further preparation. lug connection, version ii. t wo types of screw connection are provided here. a) screw set with lock nut b) with thread in the busbar clamping yoke/lug connection as a combination, version i. v ersion i version ii without thread v ersion ii g version iii with thread cables with cable lugs are connected to v ersion i sakg terminals and ss stud terminals. fitting instructions for sakg terminals when tightening the clamping screw, it is recommended that the conductor be held against the tightening direction in order to avoid any deformation of the mounting rail and to keep the terminal foot free of torsional forces. cover in order to ensure shock protection following connection of the conductors , type ah hoods can be snapped onto the terminal. sakg 28 i 0170020000 28/70/63.5 (1.1/2.76/2.5) 15 (.59) 600 v / 95 a / #2 awg 600 v / 110 a / #6? awg 1000 vac / 110 a / 35 mm 2 22.6 (200.0) 6 t ype part no. ep 1 (2) 0205100000 ep 1 (2) 0205200000 tw 1 (2) 0151400000 tw 1 (2) 0164600000 ql 2 0193900000 ql 3 0407600000 ql 4 0407700000 ah 28 0326660000 dek 5/5 0473460001 dek 5/5 0473560001
|
